Archive for November, 2012
Hairpins are attached onto the 333 Chassis…
Sunday, November 25th, 2012Front Spring Pack Mount is tacked into place…………333 Chassis
Friday, November 23rd, 2012Almost finished w/ the Axle Spring Pack Mount……Close to mounting the front axle….
Saturday, November 17th, 2012
I have a little welding left to do on the front spring pack mount before I can weld it to the 333 chassis, also need to fab up the bottom plate that will hold the spring in place. I also milled a 1.750” pocket for the top of the spring to register in. This is [...]
Almost done w/ the Rear Housing Anti-Rotational Set-up……on the 333 Chassis
Saturday, November 10th, 2012Started on the Rear Housing Anti-Rotational Set-up…..for 333
Wednesday, November 7th, 2012
I started w/ the front bar, did this to strengthen the chassis just after the rear engine mounts . This will tie into both sides of the rear-end housing tying everything together and will be removable. I could have made this all on the bottom…..but it is so much easier to work on things you [...]
The Rear Housing Brackets are fully Welded in….and the coupler still slides in…Victory is mine !
Sunday, November 4th, 2012
Next …..I will be fabbing up a anti-rotational devise into the chassis and rearend housing per NHRA rules…….