I started on the rearend housing. I used the larger 3.250” Dia. axle tubes and a Strange Engineering center section housing. I made the rear brace from 2”x3” square tubing. The ends are tacked into place after I took this pic, thanks to Jimmy @ FutureTech race cars in Mentor Ohio. He tact them in [...]

This pic is actually from when I bent the front dropped axle…..since this pic I had added wheelie bars and made a outside of the box chassis adjustment that turned out to work great. It allowed for a 9.62 E.T. slip @ 139 mph and change…Then backed it up w/ the 9.57 !…nothing counts unless [...]